Remote Laser Firing System
Video
Introduction
The Remote Laser Firing for Explosive Disrupter uses wireless transmission module to operate the laser transmitter at a distance through handheld control terminal in a safe area, so as to realize the rapid destruction at a distance and avoid direct contact with dangerous ammunition.It is a long distance, fast and stable, non-direct contact dangerous ammunition destruction device.It is mainly used for falling in the service management of combat troops,destruction of cartridges, rollover cartridges and dangerous explosive articles collected and found.The device is an important equipment for the army to perform engineering support, special destruction and other tasks.
Principle:
The Laser Firing System is is mainly composed of air-cooled 500W laser, built-in lithium battery pack, laser focusing launcher, theodolite, fixed bracket, tablet computer, packaging case, etc.
It uses the wireless transmission module to transmit signals, through the hand-held control terminal in the rear of the host in the safe area of the laser transmitter to issue commands for remote detonation, in order to achieve the rapid destruction of suspicious explosives at a distance.
Key Features
Features:
1. Composition: The equipment is composed of the host unit, laser light output and aiming unit, power supply unit, control display unit and electric PTZ unit.
2. Video collection: The device can collect clear images of the target.
3. Angle adjustment: The shooting direction and Angle of the equipment can be adjusted flexibly.
4. Real-time display: The device can display real-time video collection results of front-end components .
The equipment has night vision function.
6.The laser maximum optical power: ≥500W.
7. Wireless communication: the display control unit of the device and the host are connected wirelessly through WiFi, supporting the display control unit to display images, control the PTZ, the laser and other functions.
8. Laser irradiation point aiming: The equipment can indicate the position of laser irradiation point through the indicator light or the crosshair in the image of the display control unit.
9, coaxial aiming: laser light output unit and video acquisition unit for integration design, can achieve coaxial aiming.
10, Fast aiming: the equipment has a fast aiming function, through the control display unit in the special software operation, laser irradiation point and control display unit in the crosshair overlap.
11, laser irradiation distance setting: through the special software of the control display unit, the device can set the distance parameters between the laser light and the aiming unit and the target object, the image display of the crosshair automatically synchronously focus to the target object, and quickly focus to the laser irradiation point.
12, communication function: the equipment electric head unit and laser light output and aiming unit through the cable connection, support communication with the host unit.
| Carrying case | ABS Trolley Case |
| Carton size | 63.6*50*32.2 cm |
| Total weight | ≤32.7KG (built-in 48V 20A battery, laser transmitter, etc.) |
| Camera | 30x optical zoom camera; Support auto zoom, 2 million pixels; 1920X1080P resolution |
| Laser | Air cooled continuous transmission power ≥500W |
| Central wavelength | 1080±10nm |
| Fiber length | 2m |
| Laser power adjustment | 4 gear output power adjustable |
| Laser beam quality | <1.2 |
| Penetrability | The optical outlet distance of the equipment is 90m and 100m from the target object (Type 57 aerial arrow projectile) Penetration time: ≤22sThe distance between the light outlet of the equipment and the target (30 shells) is 90m. The penetration time is ≤40s
The distance between the optical outlet of the equipment and the target object (steel plate thickness 2mm) is 100m. The penetration time is ≤26 s The distance between the optical outlet and the target (2mm steel plate thickness) is 190m, the penetration is ≤60s The distance between the optical outlet of the device and the target (steel plate with diameter of 30mm and thickness of 3mm) is 50m. Penetration time :≤60s The optical outlet of the equipment is 50m away from the target (100mm long, 50mm wide and 3mm thick steel plate). The penetration time :≤200s The distance between the optical outlet of the equipment and the target object (diameter 30mm and thickness 3mm steel plate) is 70m. Penetration time :≤180s |
Company Introduction
In 2008, Beijing Hewei Yongtai Technology Co., LTD was established in Beijing.Focus on the development and operation of special safety equipment, mainly serve the public security law, armed police, military, customs and other national security departments.
In 2010, Jiangsu Hewei Police Equipment Manufacturing Co., LTD was established in Guannan.Covering an area of 9000 square meters of workshop and office building, it aims to build a first-class special safety equipment research and development base in China.
In 2015, a military-police Reserch and development center was set up in Shenzhen.Focus on the development of special safety equipment, has developed more than 200 kinds of professional safety equipment.
Overseas Exhibitions
Beijing Heweiyongtai Sci & Tech Co., Ltd. is a Leading Supplier of EOD and Security Solutions. Our staff are all qualified technical and managerial professionals to provide you satisfied service.
All products have national professional level test reports and authorization certificates, so please rest assured to order our products.
Strict quality control to ensure long product service life and operator work safely.
With more than 10 years industry experience for EOD, Anti-terrorism equipment, Intelligence device, etc.
We have professionally served over 60 countries clients worldwide.
No MOQ for most of items, fast delivery for customized items.
