UAV Detection and Jamming System Precise Strike
Model：HW-UAVRF-3
Description
The system consists of striking equipment, detecting equipment and background operating system. The detection system can detect the electromagnetic signal emitted by the UAV and simultaneously detect multiple targets within 3km. With unattended automatic defense function, the defense range for all-weather protection.
It can be used in all kinds of emergency scene, security scene, important activity scene, airspace of confidential units and various places to prevent UAV from falling and wounding. By setting up in an appropriate position, a UAV protection area can be formed in the designated area, and the UAV cannot enter the area. It can set up 24 hours unattended no-fly zone.
Features
I.Detection Part：
1.The equipment can have the functions of locating the drone and the pilot for DJI's latest O4 video transmission.
2.It has the function of receiving analog video transmission of FPV drones.
3.Frequency band support: Supports the 25MHz - 6GHz frequency band.
4.Key frequency band monitoring: 433MHz, 900MHz, 2.4GHz, 5.2GHz, 5.8GHz.
5.Reconnaissance distance: ≥5 kilometers.
6.Direction - finding accuracy: ≤10° (while following); ≤3° (while hovering).
7.Reconnaissance sensitivity: ≥ - 115dBm (25kHz).
8.Reconnaissance airspace: Capable of 360 - degree all - airspace reconnaissance.
9.Adaptable communication modulation methods: FM, 2FSK, 4FSK, GFSK, MSK, BPSK, QPSK, 16QAM, 64QAM, OFDM, DSSS, FHSS.
10.Power supply: AC100-240V.
II.Jamming Part：
1.With 8 channels：
|
Channel |
Power |
Function |
|
410MHZ-470MHZ |
50W |
UAV remote control frequency band |
|
830MHZ-940MHZ |
50W |
UAV remote control frequency band |
|
1180MHZ-1280MHZ |
50W |
UAV video transmission and positioning frequency band |
|
1420MHZ-1460MHZ |
50W |
UAV image transmission frequency band |
|
1555MHZ-1655MHZ |
50W |
UAV positioning and navigation frequency band |
|
2400MHZ-2485MHZ |
100W |
UAV remote control and image transmission |
|
5150MHZ-5350MHZ |
50W |
UAV image transmission frequency band |
|
5725MHZ-5850MHZ |
100W |
UAV image transmission frequency band |
2.Jamming function: It can emit jamming signals to make the drone return or land in place (the drone supports return or forced landing function).
3.The time required from starting jamming to the drone being successfully jammed is ≤3 seconds.
4.Jamming distance: In an environment without obvious rain, snow, or fog (without obvious obstructions and without obvious electromagnetic interference), the device's jamming distance to the drone is not less than 1.5 kilometers.
III.Software operating system
1.Basic information settings
(1) Spectrum detection setting: Set the connection IP and port of the detection equipment.
(2) Server operation setting: Set the connection IP and port of the strike equipment.
(3) Automatic interference parameters: Set the interference duration and strike interval.
(4) Map online status setting: Set online maps and offline maps.
(5) Whitelist list: Display the drones set as whitelist.
(6) Location setting: Provide two modes, automatic and custom, to set the center point coordinates of the detection equipment.
(7) Custom setting frequency band: Users can set the frequency bands to be opened in expulsion and forced landing according to needs.
2.Spectrum detection
(1) Strike log: Record the log information of each interference of the system.
(2) Spectrum detection information: Record all the drone information detected. You can add the drone to the whitelist and export the drone information to Excel for local viewing.
(3) Drone historical trajectory: You can view the historical trajectory of the drone's flight.
3.System management
(1) Platform connection setting: Used to set the IP and port of the drone control platform, so that this system can be remotely viewed in the drone control platform.
(2) Software version number: Display the version numbers of the software and hardware systems.
Company Introduction
In 2008, Beijing Hewei Yongtai Technology Co., LTD was established in Beijing.Focus on the development and operation of special safety equipment, mainly serve the public security law, armed police, military, customs and other national security departments.
In 2010, Jiangsu Hewei Police Equipment Manufacturing Co., LTD was established in Guannan.Covering an area of 9000 square meters of workshop and office building, it aims to build a first-class special safety equipment research and development base in China.
In 2015, a military-police Reserch and development center was set up in Shenzhen.Focus on the development of special safety equipment, has developed more than 200 kinds of professional safety equipment.
Overseas Exhibitions
Beijing Heweiyongtai Sci & Tech Co., Ltd. is a Leading Supplier of EOD and Security Solutions. Our staff are all qualified technical and managerial professionals to provide you satisfied service.
All products have national professional level test reports and authorization certificates, so please rest assured to order our products.
Strict quality control to ensure long product service life and operator work safely.
With more than 10 years industry experience for EOD, Anti-terrorism equipment, Intelligence device, etc.
We have professionally served over 60 countries clients worldwide.
No MOQ for most of items, fast delivery for customized items.
